Today I’m excited to join Sharon Burgess of Lilabelle Lane Creations in celebrating her new book, A Stitch in Time: English Paper Piecing published by Tuva Publishing. I had so much fun making the Mummy Rosie Mouse pincushion from Sharon’s new book, and when it came time for the photoshoot, I just couldn’t stop at one. Was this part of what motivated me to get my “back to blogging” post up yesterday? Yes, absolutely. Whatever it takes, right!?
A few months ago when Sharon asked me to be a part of her book tour, I didn’t hesitate to say yes. I had made Sharon’s block for the Splendid Sampler 2 and loved it, and English Paper Piecing (EPP) is quickly becoming my go-to style of quilting because of its portability and versatility. A Stitch in Time is a fun book including 18 small projects that combine EPP with vintage linens, embroidery, appliqué, patchwork and quilting. It’s a great resource for hand-stitched gifts that won’t require a year’s worth of stitching.
As I flipped through the beautiful book trying to decide what project to make, I fell in love with the mousie pincushions immediately. I opted to make the larger of the two, and thus my Mummy Rosie came to be.
I used a bunch of turquoise/teal scraps to piece Rosie’s back, and realized that this project would make SUCH a great scrap buster. I might just start making 3/4″ hexies and throwing them in a jar to make mousies!
Any project that involves cutting through a hand-stitched panel always is painful, but I forged ahead with gritted teeth and it was worth the pain of trimming. As you can see, I marked the template plastic with guides around some of the hexies so that when I cut each panel, they would be symmetrical. It worked well!
I love how so many of the projects in Sharon’s book include little embellishments with embroidery, cute ribbon, and vintage lace. Rosie not only has a scissor pocket on the bottom, which makes use of a pretty coordinating ribbon I bought from my local quilt shop Fiddlehead Artisan Supply, but it also calls for some embroidery on Rosie’s head.
I decided to pull out the Embroidery Iron-on Transfers designed by Alison Glass and found a sweet little flower from her Diving Board Set. This was my first time using these Iron-on Transfers, but they worked SO well and were super easy to use! Now I’m itching to figure out what else I can add a bit of embroidery to!
Here’s a peek at the process. You can see how well the lines transfer onto the fabric. It’s reallllly easy to use, too. I used a selection of Aurifil 12wt thread to embellish Rosie’s head with the Alison Glass flower and some surrounding french knots. I used 4182-Dark Turquoise, 5006-Light Turquoise, and 5007-Light Grey Blue and they were perfect complements.
I think it’s a good look, don’t you?
The pattern calls for attaching 2 1/2″ scissors, but I opted to attach my 4″ Warm Crochet scissors since I use them often. Plus, when you are a mouse living in a jungle of turquoise that is prowled through by a cat and three kiddos, you need all the protection you can get!
Rosie’s ready for action, don’t you think?
Be sure to check out the rest of the folks participating in Sharon’s book tour. There are so many great projects! You can check the hashtag #astitchintimeepp on Instagram to get a peek of quite a few of them. There’s sure to be one you fall in love with!
Once again I was honored to have the task of doing the quilt photography for the 
This year, we were definitely a lot more relaxed and peaceful during the photoshoots, which I’m sure Garrett appreciated!
With projects photographed all through Maine, next year’s planner is sure to inspire, and if you haven’t ordered yours yet, I definitely recommend doing so! As an added bonus (and added irons on the fire) I also contributed a pattern to the 
Perhaps the most exciting and monumental project I tackled over the course of the summer was the design of my very first English Paper Piecing pattern with 
Perfect for both beginner and experienced EPPers alike, Pollinate is a diverse pattern that has endless possibilities for design and color play. Plus, the “filler” sections look like bees!! You can see the many different Pollinate quilts taking shape on Instagram by checking out the 
This summer I was honored to work with 
I photographed all 9 different weights of thread offered by Aurifil in a variety of stagings, and truly enjoyed the process. You can scroll through the photos on the top of the Aurifil Thread website to see a selection of my photos, and I’ve included a couple of my favorites here. There’s also a fun interview with me on the 
This summer I also tackled the 
I’m excited to be one of the 
Here is a screenshot showing some of the blocks I’ve made so far. You can see all of them on 
I also created a Facebook group called 
You probably remember the improv, make-it-up-as-I-go 
I’m officially 11 days into 
1/100
2/100
3/100
4/100 (which was also the day when I created a foundation paper pieced template for my day 11 block. I didn’t sew that one until today, but the idea was born on day 4!
5/100
6 & 7/100 – Day 6 was the day of my daughter’s First Communion & Confirmation and my family was visiting all weekend, so I got a self-granted “bye” on posting. I caught up on my birthday, day 7!
8/100
9/100
10/100
11/100
Days 1-3
The first week of blocks
The first 10 days
I love how your challenge is going Kitty and how it relates to you as a quilter but also think you should let it be organic and use the 100 days to explore if needed and push yourself also if needed. Don’t get locked into a direction.
I’ve worked ahead twice (once when my entire family was visiting for the weekend for my daughter’s First Communion, and once today since I know weekends are often filled with family time and not necessarily sewing time), but have stuck with the block per day format.
I’ll leave you with a cheeky peek at the backside of my latest block, since one of the big questions I’ve gotten so far over on Instagram is “How big is your seam allowance?”. My answer: 1/4″ seam allowance, just like always. Note that so far I’ve created blocks with mostly straight joins, and I might scale a few seam allowances down to 1/8″ to decrease bulk as I experiment further, but for the most part, the 1/4″ seam works just fine!
I’m excited to share that I was invited to contribute a block to The Splendid Sampler 2 party, and I happily obliged! There are still a lot of unrevealed details around this splendid sequel, so I can’t tell you anything else about my block, but I am excited to get started sewing along!
This post is a sponsored conversation written by me on behalf of Cricut. All opinions and text are my own. This Flying Geese Table Runner includes both traditional piecing and embroidery or hand quilting. If you don’t have a Cricut Maker, I’ve included cutting instructions and a pdf as well, so anyone can make it!
Prepare your mats as instructed, smoothly spreading your fabric onto your 12″x24″ FabricGrip mat. The Cricut Maker will lead you through the entire process, so simply follow the screen instructions and let the Cricut Maker work its magic!
The Cricut Maker will both draw the washable embroidery guide lines AND cut the larger rectangle for you!
When I designed the drawn geese section, I designated the geese shapes as draw lines rather than cut lines and ATTACHED them to a larger cut background rectangle, about 11 1/2″ x 13 1/2″ in size so that they would be easier to embroider. For those of you designing for your Cricut Maker, this is key to remember when you want to combine both cut lines and drawn lines! Also, many thanks to 
The Cricut Maker will also prompt you to cut squares of your focal fabric, small squares of background fabric, and some background rectangles. Once the fabric is cut, carefully remove the excess fabric, revealing your perfectly cut shapes. Carefully remove the fabric from the mats, and then get ready to sew!
The embroidered accent geese are meant to add some subtle accent interest to your table runner, since hand stitching of any kind (in my mind) adds a special touch. Especially with a project that will be seen often, those hand stitches can echo the sharp aesthetic of the pieced flying geese.
Gather your embroidery hoop, background fabric with your flying geese drawn on, and a thick 12wt thread, embroidery floss, or perle cotton in a coordinating color. I chose to use 
You can use the drawn embroidery guides to do any type of embroidery you want. I chose to do a simple running stitch around each flying goose, but feel free to get creative! Chain stitch would me another fun stitch to use to outline each goose, you could echo the stitching inside each goose as well, or even fill the geese with french knots!
Once you’ve finished embroidering your geese, carefully trim the panel into two rows of geese, cutting 1/2″ away from the side points of each row. Do not cut the top or bottom of each row of flying geese. You should now have two embroidered geese panels measuring 5″ x 13 1/2″.
With your fabric pieces cut perfectly by the Cricut Maker, or as specified above, piece your flying geese using the four at a time method. I used the Reference section of my 
Make twelve geese total and sew them into two strips of six as shown above. See how they are mirrored by the embroidered strips? Note that your embroidered strips should be cut apart by this step.
When sewing two geese together, position the point of the goose on top and make sure your stitch line passes exactly through the stitched point of your goose.
This way, you will be sure to never chop off the point of a flying goose ever again!
Once your flying geese rows of six are assembled, sew a 1 1/4″x 4″ piece of background fabric to the top and bottom of each strip. Align with your 13 1/2″ embroidered geese strips, and trim the pieced flying geese strips to 13 1/2″ if needed, being sure that your embroidered geese align with your sewn geese before trimming. There is a little bit of wiggle room included in the top and bottom background rectangles to allow for those who sew scant or generous 1/4″ seams, so trim as needed.
First sew together the flying geese panels of the table runner. I’ve arranged mine on top of my backing fabric so that you can clearly see the different pieces being sewn together. With geese facing the same direction, sew the embroidered flying geese section to the pieced flying geese section. Then sew to the 2 1/2″ x 13 1/2″ background rectangle. Make two.
Assemble the table runner top by sewing the sections together as shown above: Note that the embroidered flying geese panels should be sewn to the center background piece on both ends.
Once your table runner top is pieced, position the runner top and batting in the center of your chosen backing fabric, right sides facing away from each other. In other words, layer and baste your table runner and prepare for quilting!
I chose to use Aurifil 50wt 2479- Medium Orchid to quilt my Flying Geese Table Runner with a dense free motion quilting pattern in the center, simple outlines of the pieced flying geese, and dense free motion quilted switchbacks in Aurifil 2021-Natural White between both the pieced and embroidered geese. I wanted the texture but not the visual distraction from my hand stitching.
I’m certainly not a free motion quilting pro, but I am pretty happy with my over-all heart-flower free motion quilting motif! Plus, how fabulously do those tulips go with the BariJ Sage fabric backing!?
Once your table runner is quilted as desired, carefully fold back the backing fabric and trim the batting *just* outside the top of your table runner top. I gave myself a little less than 1/8″ around the edge of my table runner.
Be extra careful not to cut your backing fabric during this step!
A full tutorial for how to bind your quilt with the backing fabric can be found 
I wanted my binding to be slightly slimmer, so I cut mine 3/4″ from the edge of the table runner top instead of 1″, but choose whichever you prefer.
Ta da! Your table runner is nearly finished! All that remains is to wash out the washable fabric marker lines. I’ve found that the Cricut Washable Fabric Pen easily washes out with a bit of soap and cold water. Note that if you prewash your fabrics, you can wash out the fabric pen before trimming and piecing the embroidery panels into your table runner. I don’t prewash my fabrics, so I opted to wash it all at once after it was completely finished.
After giving my table runner its first wash, and in looking at these photos, I think I will go back and hand quilt within those embroidered flying geese to give them a bit more texture.
Enjoy, and I hope you’ll share a photo of your Flying Geese Table Runner if you make one! You can tag me on social media 
This post is a sponsored conversation written by me on behalf of Cricut. All opinions are my own and I only share products that I think are awesome. Note that there are no affiliate links included since I live in Maine where affiliate programs aren’t permitted, but I have linked to referenced products for your ease. Business aside, shall we get on with the fun? Let’s!
I set aside a day where I would have a window of a few hours without any of the kids home to first unbox my Cricut Maker, since I knew that I would need to not only figure out how it works, but also figure out how to use Design Space, where your projects and designs are created. I was pleasantly surprised at how extremely easy and user friendly the entire set up was! I probably could have figured it out with all three kids hanging on me–it was that intuitive!
To set up the Cricut Maker, I just went to the Cricut website and found the 
I went into my Cricut Maker exploration day with full intention of diving into its capabilities for the world of quilting, but in exploring the Cricut Design Space, I accidentally–OOPs!–ended up bedazzling one of my daughter’s tank tops with a glittery iron-on unicorn! The 
It didn’t take me long at all to have the unicorn cut since it was a free image already in the Design Space, and the 
Within a half an hour, I had a fully bedazzled unicorn tank, which fortunately my daughter LOVED when she got home from school.
The Cricut Maker comes with a fine point pen, but there are also a 
The pens and blade tools are *really* easy to install and switch, since they are held in with an easy snap clamp, and the Cricut Design Space prompts you on what pen or blade to insert before each project so that you’re sure to use the correct blade for your project.
Using the 
Now that you’ve seen the rotary blade from every angle, wouldn’t you agree that that’s the cutest little rotary blade you ever did see?
The blades snap into the little B compartment to the right of the A pen holder, and it’s incredible easy to switch blades when needed. The Cricut Maker also has ample space for storage of unused blades, pens, and tools, which is really handy for someone like me who doesn’t have a whole lot of extra storage space.
For example, when I do something he really loves, he says, “You just got 10,000 hearts in your heart tank!” and if we tell him he can’t have a second cookie, he says, “Your heart tank is almost empty!” in a warning voice, finger wagging for emphasis. How perfect is this little robot for him? I’m thinking I’ll make it a layered card stock creation to frame for his room. This was easy to make, since the robot is a free image in the Design Space, and adding the heart, customizing colors, and adding the text was very straightforward.
Now for the nitty gritty: how much does the Cricut Maker cost? The 
Here’s a sneak peek at a project tutorial I’ll be sharing for the Cricut Maker next week that pairs quilting and embroidery, so stay tuned!
I headed off to QuiltCon with an English Paper Piecing (EPP) project–the Mandolin Quilt Block by Jodi at Tales of Cloth. I had gotten a bit further than 
While I was traveling, the mending on my most-worn jeans began to wear through, but fortunately I was able to pick up a mending kit from the 
I used the 12wt 
My long flight back to NJ after QuiltCon allowed me to finish both of these hand stitching projects, which felt pretty amazing since I typically make progress at a snail’s pace.
With 16 diverse patterns including a variety of techniques including traditional piecing, applique, and foundation paper piecing, this book is a great resource for quilters of all levels of experience. For the next few weeks, be sure to follow along with the 
One thing I love about the Signature Plus pattern is that it’s designed as a pattern well suited to group quilts, inspired by Red Cross signature block quilts from the early twentieth century. You can read more about the history of Red Cross quilts 
Selecting fabric combinations and color arrangements is one of my favorite stages in the quilting process. So a few months ago, when my friend Bernie asked if I would be interested in putting together a Blogger Bundle of fabric for her Etsy store 
While this bundle is versatile enough that any one of the fabrics could shine, there is definitely a star of the show in my mind, and that’s the Tartan Field in 
The other fabrics have all been carefully selected from Bernie’s shop to coordinate and complement Sharon’s print, and I love how the colors of all of the other fabrics mesh so well with it.
The bundle includes (from top down in the photo above):
Just for fun, these tulips had to join the fun since spring is not even close to appearing here in midcoast Maine yet, and I was in dire need of some cheer. Aren’t they luscious?!
Now, for the giveaway! Today I’m flying across the country to Pasadena for QuiltCon, but I thought it would be fun to kick off my QuiltCon adventures with a blog giveaway. Bernie has generously offered this bundle of five (5) fat quarters to one of my lucky readers.
Love this bundle and don’t want to wait? You can get yours 
Night Quilter 