what the bobbin | Night Quilter

Today I’m sharing the tutorial for how to make the outer panel of a Zippy Quilter’s Planner Cover like the one I made. I’m calling it Riot of Color and it’s a tribute to Alison Glass and her consistently bold and beautiful fabrics. A full color pdf of this tutorial is available on the Quilter’s Planner website, so head on over there to download it!

This tutorial is for creating the outer panel for the Zippy Quilter’s Planner Cover pattern customized by Stephanie (Late Night Quilter) and Amanda (What the Bobbin) for the Quilter’s Planner. This tutorial will provide cutting and piecing instructions for the outer panel (11”x19 1/2”). From there, follow the instructions in the Quilter’s Planner cover pattern found at http://quiltersplanner.com to make the full zippy planner cover, using this 11”x19 1/2” panel as the “exterior fabric”.

The secret to this cover’s creation is the fabric choices. The dark grey of the Essex linen in Charcoal (Robert Kaufman Fabrics) lets the bright bold colors of Alison Glass’s Sun Prints 2016 and Art Theory panel in Charcoal (from Ex Libris – Andover Fabrics) shine. This could also be made using a favorite large scale print for the feature fabric and fussy cut bits for the squares, but be sure to use a contrasting solid or reads-as-solid background fabric so that the construction shines.

General Notes: Seam allowances are 1/4” throughout unless indicated otherwise. I like to press seams open, but in some cases I pressed to the side for this project. I will note those places in this tutorial.

Cutting

First, cut all of your fabric pieces according to the Cutting Requirements chart and diagram above.

A Note About the E Pieces

Here’s where I’m going to be real with you. The DE strips have a lot of seams. This means that if your 1/4” seam allowance is off by even a little bit, your strip may be slightly the wrong size. In the cutting chart above, I’ve accounted for this human error. (You’re welcome!)

*IF* your seams are an absolute perfect 1/4” and your cutting is precise, the top and bottom E pieces on both strips (four E pieces total) only need to measure 1 1/2” x 3/4”.

This tutorial allows you to trim the excess at the end so that you don’t have to worry as much about the precision of your 1/4” seam. That said, focus on straight, consistent seams and we will adjust for scant or generous seams during the process! If you feel like you want to be a Perfect Seams Superhero and save yourself some math and cutting, use 1 1/2” x 3/4” E pieces on the top and bottom of each strip. Go ahead and cut your pieces.

Ready? Lay it all out how you want it and then start assembling!

Assembly

Pair each D piece right sides together with an E piece and sew with a 1/4” seam allowance.

I like to get them all ready and then chain piece to save time.

Organization Tip
Be sure to take a photo of your layout before sewing so that you have a visual reference along the way!

Set seams and press open. Lay them out again and check your reference photo. There should be one E that has not yet been paired and sewn. Pair and sew components of the DE strips until they are completely assembled. Press seams open.

If you are being a Perfect Seams Superhero today and used 1 1/2” x 3/4” E pieces on the tops and bottoms of your strips, confirm that your fully assembled strip now measures 1 1/2” x 11”, pat yourself on the back and skip ahead to the full panel piecing.

If you are being merely human today, give your strips a good press and lay them on your cutting mat. It’s time to measure how much excess you have and take care of it.

We want the finished strips to measure 11” long, but we want to be sure our colorful bits stay centered. To do this, take the following steps (the example shown is in parenthesis):

Measure each strip to the nearest 1/8” being sure to press it flat so that it extends to its full length. (My strips shown measured 11 1/2” when I held them flat.)
Take the difference of 11” from the length of your strip. (11 1/2 – 11 = 1/2”)
Divide the difference by 2. (1/2” / 2 = 1/4”)
That’s how much you should trim from each end of your strip. (I trimmed 1/4” from each end)

Now, measure your strips again. Each strip should measure 1 1/2” x 11”. Don’t worry about a little wobble or wonk at this point. Everything will be smoothed out during the final assembly!

Next, we will piece the rest of the panel.

Lay out all of your pieces again as shown (left to right): C, DE strip, B, A, B, DE strip, C.

Sew them together!

Here’s the order in which I assembled it, but do what works logically for you.

Right sides together, sew B pieces to A. Press seams open. This is the BAB unit.
Right sides together and double-checking the orientation of the DE strips, sew C outer pieces to DE strips. Press toward C. These are your DEC units.
Sew DEC units to the BAB unit, pressing seams toward BAB.

Give your panel a good press, check that it measures 11” x 19 1/2” and trim if needed.

From here, head over to the Zippy Quilter’s Planner Cover tutorial by Amanda and Stephanie to complete your planner cover! Use this Riot of Color panel as the “exterior fabric”.

Have fun creating your own versions of this cover, and please tag me @nightquilter if you post pictures on social media. I always love to see what you create!

I’m linking up with Stephanie’s Tips and Tutorials Tuesday. I love collaborating with that girl! Can you tell?

Some people experience nesting before a baby by feeling the urge to clean and reorganize everything. I wish I felt that way, honestly. It would be wonderful to have that “nesting” drive all the time and to effortlessly have a pristine and organized home. Not being the most enthusiastic cleaner, though, I have been nesting by thinking about small stitching projects I can do a tiny bit at a time for once our little bundle of joy makes his appearance.

I’ve been wanting to try embroidery and figure this may be the perfect time! I am hoping that by having some embroidery floss or thread and a ready-to-go hoop sitting on the table next to the glider, I will have a little creative outlet while nursing and rocking and nursing and rocking (with plenty of breaks to gaze in wonderment at my little boy).

Yes, I’ve been nesting. I bought the Color Wheel Sampler by Rebecca Ringquist of Dropcloth, and a couple of adorable needle minders made by Amanda from What the Bobbin (the little house is one of them!). Alex from Aurifil was kind enough to send me a collection of 12wt embroidery thread–the Splendor 1920 collection by Bari J–to get me started in my embroidery adventures. I’m already in love with the smooth, gorgeous thread and am looking forward to expanding my collection (and it just may encourage me to do some more hand quilting, or even try using 12wt thread with 50wt in the bobbin for machine quilting!).

I’ve been slowly learning the stitches and so far I’ve completed the herringbone stitch section on the color wheel. Embroidery is awfully fun, and quite relaxing.

The Bari J Splendor 1920 collection of 12wt Aurifil thread is such a gorgeous rainbow of silky thread. After using embroidery thread and perle cotton for my initial embroidery attempts, using this 12wt thread is a dream. I love that it doesn’t separate into strands, and it is silky smooth without being twisty like perle cotton. At first, I thought I might need to use two strands, but one strand ended up being ample to cover the guiding lines. I’m definitely looking forward to working 12wt thread into my quilting projects, too.

For those of you who are seasoned embroiderers, do you have any tips to share with a newbie?

I’m linking up with Monday Makers, Design Wall, and Molli Sparkles’ Sunday Stash, since these are all gorgeous additions to my stash that have not yet been shared, and it seems like this week’s stash theme is thread! As an added fun little tidbit, my baby boy has a good chance of sharing a birthday with Mr. Molli!!